Vecoplan® compatible left hand anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000179, 3591000598
| Make | Vecoplan® |
| OEM Number | 3590000167, 3590000355, 3591000179, 3591000598 |
| Shredder Model | RG52/150SPK FF, RG5200 |
| C-C Number | 52150RGLH |
| Length | 17.086 |
| Width | 3.780 |
| Thickness | 1.082 |
| Knife Type | Flat |
| Reversible | Yes |
| Hole Type | CBS |
| Thread | M12x1.75 |
| Tooth Style | Flat |
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Vecoplan® compatible 40mm concave cutter, angled corner, D2 Material, for Model V-Echo, OEM# 3530000239
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Vecoplan® compatible center anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000181, 3591000599
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Vecoplan® compatible right hand anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000180, 3591000597
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Cresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
Hardware Fits: AEC 34mm Holder 3434HC
Compatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130
Serrated Flange Type Cutter Bolt, Fits 40mm cutter
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
