Vecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter center, 3 or 4 per set, D2 Material, for Model VAZ1800 F&F, RG52, RG62, OEM# 3591000803M, 3591000804C
| Make | Vecoplan® |
| OEM Number | 3591000804C
3591000803M |
| Shredder Model | VAZ1800 F&F
RG52 RG62 |
| C-C Number | 1800VAZ40MC |
| Length | 10.119 |
| Width | 3.668 |
| Thickness | 1.118 |
| Knife Type | Anvil |
| Reversible | Yes |
| # Cutting Edges | 1 |
| # of Holes | 2 |
| Hole Type | TPD |
| Thread | M12 x 1.75 |
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Weima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
Cutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
If you didn’t see your particular part, then please fill out as much information on the form to your left and well will work on reverse engineering it to meet or exceed OEM standards.
Weima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
