Description
| Make | Cresswood® |
|---|---|
| OEM Number | 80362 |
| C-C Number | 125125HC |
| Length | 1.625 |
| Width | 1.250 |
| Thickness | 1.250 |
| Knife Type | |
| Reversible | No |
| # Cutting Edges | 0 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
125125HC
Cresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
You may also like…
-
CW12040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80006
-
CW10040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80246
-
CW1204010BP
Read moreCresswood® compatible 12″ bed plate for anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 drill through holes, D2 Material, OEM# G60226
-
CW1004010BP
Read moreCresswood® compatible bed plate for anvil, 1-1/4″ shredder, 6 full teeth, 2 half teeth, 2 countersunk holes, 3 drill trough holes, Mild Steel Material, OEM# G40133
-
B500-20X2
Read more1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters
-
125125745CG
Read moreCresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
125125745CR
Read moreCresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
Related products
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
-
150150812CR
Read moreCresswood® 1-1/2″ Crown Style with Raised Center. 1-1/2″ X 1-1/2″ X 13/16″ – Material: D2. Uses Holder: