Description
| Make | Vecoplan® |
|---|---|
| OEM Number | 7309200046 |
| C-C Number | 4040HCL |
| Length | 1.2.500 |
| Width | 1.562 |
| Thickness | 1.562 |
| Knife Type | |
| Reversible | No |
| # Cutting Edges | 0 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
4040HC
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
You may also like…
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
-
M1217570H
Read moreCutter bolt hex head Fits: 40mm raised center Uses M12HCLW – Lockwasher
-
M1217565H
Read moreCutter bolt hex head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
-
404025F
Read moreCompatible with Vecoplan®, 40mm Flat Nip, D2 Material
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
-
404020CR
Read moreCompatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
-
M1217565
Read moreCutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
-
M1217570
Read moreCutter bolt Socket Head Fits: 40mm raised center Uses M12HCLW – Lockwasher
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
-
404020CRS
Read moreCompatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Related products
-
606030C
Read moreCompatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130
-
M1217540
Read moreHardware Fits: AEC 34mm Holder 3434HC
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
100100600CR
Read moreCompatible with Cresswood®, 1″ Concave Cutter, Raised Center, D2 Material, Use with Holder 100100HC