Description
Make | Weima® |
OEM Number | 009002000534 |
Shredder Model | WLK 15 |
C-C Number | 15WLK2794015 |
Length | 10.997 |
Width | 4.823 |
Thickness | 1.588 |
Knife Type | Angled |
Reversible | No |
Hole Type | CS |
Tooth Style | Sharp |
Weima® compatible right center anvil, 10.997″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000534
Make | Weima® |
OEM Number | 009002000534 |
Shredder Model | WLK 15 |
C-C Number | 15WLK2794015 |
Length | 10.997 |
Width | 4.823 |
Thickness | 1.588 |
Knife Type | Angled |
Reversible | No |
Hole Type | CS |
Tooth Style | Sharp |
Weima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
Weima® compatible left hand anvil, 11.510″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000537
Weima® compatible center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
Compatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
Weima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
Compatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB
Weima® compatible right hand anvil, 9.287″ x 4.598″ x 0.610″, 3 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000533
Weima® compatible left center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
Weima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR