Description
| Make | AEC® |
| OEM Number | ESS80001202 |
| C-C Number | AEC2798030 |
| Length | 10.984 |
| Width | 3.150 |
| Thickness | 1.181 |
| Knife Type | Flat |
| Reversible | Yes |
| Tooth Style | Sharp |
| Hole Type | S |
| Thread | M16x2.0 |
AEC2798030
AEC®, Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® compatible anvil, 7 teeth, D2 Material, OEM# ESS80001202
You may also like…
-
3434HC
Read moreAEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.
-
M1217540
Read moreHardware Fits: AEC 34mm Holder 3434HC
-
343420CR
Read moreAEC 34mm Crown Style with Raised Center. 34MM X 34mm X 20mm – Material: D2 Uses Holder: 3434HC Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders
Related products
-
4040WHCB
Read moreWeima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
-
4040HCL
Read moreCompatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL