Description
| Make | Weima® |
|---|---|
| OEM Number | 009001000009 |
| C-C Number | 4040WHCB |
| Length | 1.625 |
| Width | 1.530 |
| Thickness | 1.530 |
| Knife Type | Flat |
| Reversible | No |
| # Cutting Edges | 0 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
4040WHCB
Weima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
You may also like…
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
M1217545FL
Read moreSerrated Flange Type Cutter Bolt, Fits 40mm cutter
-
4040WHC
Read moreWeima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
-
404023CS
Read moreCompatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB
Related products
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
-
404020CR
Read moreCompatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
-
125125HC
Read moreCresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
-
404025C
Read moreChinese Shredder Crown Style. 40mm X 40mm X 25mm – Material: D2