Weima
Below is a listing of most of our inventory. If you would like more information or a quote, please follow the instructions provided by filling out the 'Your Information' form and adding a check mark to the parts you are interested in.
Step 1: Check the product box(es) on this page that you are interested in receiving a quote for.
Step 2: Fill out the form below with your information.
Step 3: Click the Submit button to send your request to us and we will be in touch with your quote soon.
Your Information
-
15WLK2364015
Read moreWeima® compatible right hand anvil, 9.287″ x 4.598″ x 0.610″, 3 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000533
-
15WLK2794015
Read moreWeima® compatible right center anvil, 10.997″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000534
-
15WLK2924015
Read moreWeima® compatible left hand anvil, 11.510″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000537
-
15WLK3354015C
Read moreWeima® compatible center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
-
15WLK3354015L
Read moreWeima® compatible left center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
-
303019CR
Read moreCompatible with Weima®, 30mm Concave, Raised Center Cutter, D2 Material
-
403015CB
Read moreCompatible with Weima® Broaching Knife Weima 40mm x 30mm x 15mm with counterbored slot, D2 Material
-
404023CS
Read moreCompatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB
-
505020CR
Read moreWeima® compatible 50mm concave cutter, D2 Material, for Model WT1800, OEM# 009001000084
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
4040WHC
Read moreWeima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
-
4040WHCB
Read moreWeima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
-
606030C
Read moreCompatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130